PRODUCTS
HCS135
Category： Enclosed ball screw drive module
If you have any questions or would like to inquire about pricing, please don't hesitate to reach out to us.
Specification Application Downloads Customizing Packing
Specification
Specification
|
Perf |
Repeatability |
mm |
±0.02/300 |
||||
|
Screw lead |
mm |
5 |
10 |
20 |
|||
|
Max.Speed |
mm/s |
180 |
360 |
700 |
|||
|
Max.Payload |
Horizontal |
kg |
80 |
70 |
50 |
||
|
Vertical |
kg |
40 |
35 |
20 |
|||
|
Rated thrust |
N |
2381 |
1190 |
595 |
|||
|
Stroke |
mm |
50~1500/50Pitch |
|||||
|
Parts |
Screw cuter diameter |
mm |
20 |
||||
|
High rigidity linear guide |
mm |
15×12.5 |
|||||
|
Couping |
mm |
Φ12×Φ14 |
|||||
|
Senor |
Outside |
|
FC-SPX307(NPN) |
||||
※ Acceleration and deceleration value is set 0.2 second.
※When the stroke is over 800 mm the run-out of the ballscrew will occur,we recommend to slow down the workingspeed underthis circumstances.
Allowable overhang
(Unit:mm)
|
Horizontal Installation |
A |
B |
C |
|
| Lead5 | 30kg | 420 | 380 | 410 |
| 50kg | 320 | 265 | 300 | |
| 80kg | 225 | 185 | 210 | |
| Lead10 | 30kg | 410 | 375 | 400 |
| 50kg | 300 | 255 | 270 | |
| 70kg | 190 | 150 | 160 | |
| Lead20 | 10kg | 580 | 550 | 565 |
| 30kg | 360 | 320 | 330 | |
| 50kg | 200 | 185 | 190 | |
(Unit:mm)
|
Wall Installation |
A |
B |
C |
|
| Lead5 | 30kg | 420 | 380 | 410 |
| 50kg | 320 | 265 | 300 | |
| 80kg | 225 | 185 | 210 | |
| Lead10 | 30kg | 410 | 375 | 400 |
| 50kg | 300 | 255 | 270 | |
| 70kg | 190 | 150 | 160 | |
| Lead20 | 10kg | 580 | 550 | 565 |
| 30kg | 360 | 320 | 330 | |
| 50kg | 200 | 185 | 190 | |
(Unit:mm)
|
Vertical Installation |
A |
B |
|
| Lead5 | 10kg | 420 | 420 |
| 20kg | 300 | 300 | |
| 40kg | 180 | 180 | |
| Lead10 | 10kg | 420 | 420 |
| 20kg | 290 | 290 | |
| 35kg | 180 | 180 | |
| Lead20 | 5kg | 480 | 480 |
| 10kg | 360 | 360 | |
| 20kg | 250 | 250 | |
(Unit:Nm)
| MY | 505 |
| MP | 430 |
| MR | 454 |
※The torque value in the chart indicate the center of gravity.
※ Operation life is 10,000 km when the productis usingunderthe specified conditions.
※ Data information is not forceiling-mount inverse use.Contact us for the details if you want to apply ceiling-mount inverse usage.
Suitable Moter Brand
| Brand | Mark | Brake | Watt(W) | AC-Voltage (V) | Motor Model | Driver Model |
| Leadshine | L | No Brake | 400 | 220 | ACM1S-06004H2F1 | L6-400 |
| With Brake | 400 | 220 | ACM1S-06004H2F1 | L6-400 | ||
| Delta | T | No Brake | 400 | 220 | ECM-B3M-C20604RS | ASD-B3-0421-L |
| With Brake | 400 | 220 | ECM-B3M-C20604RS | ASD-B3-0421-L | ||
| Panasonic | P | No Brake | 400 | 220 | MSMF082L1U2 | MADLN25SE |
| With Brake | 400 | 220 | MSMF082L1V2 | MADLN25SE |
Application
Downloads
-
File size: 1.4MB
Customizing
Speed Customizing
Performance-Based Customization Tailored solutions based on speed and load capacity requirements.
Color Customizing
Special Environment Customization Anti-rust treatment for lead screws and guide rails. High/low temperature customization for motors and modules. Explosion-proof environment adaptation. Vacuum environment adaptation.
Dustproof Customizing
Dust Protection Customization Installation of bellows covers for dust-proofing. Let me know if further refinement is needed!
Software Customizing
Multi-axis setup, program customization.
Packing
Keywords：HCS135
Prev： Nothimg！
Next： Nothimg！
Product Inquiry
Leave the information you want to consult and we will contact you as soon as possible